Filter
Top Products
53
Function list (Simple mode parameters)
!
Set this parameter to display/set the extended function parameters.
Select the inverter control system such as speed control, torque control or position control.
Refer to page 43 for details.
Pr. 160 "extended function display selection"
Setting Description
0 Only the simple mode parameters are displayed.
1 All parameters are displayed.
REMARKS
Refer to page 54 for the parameters (extended function parameters) available when "1" is set in Pr. 160 "extended function dis-
play selection".
Pr. 800 "control system selection"
Setting Drive System Control Method Remarks
0
(factory setting)
PLG vector control
Speed control Factory setting
1 Torque control
2
Speed control-torque control
switchover
MC ON: Torque control
MC OFF: Speed control
3 Position control
4
Speed control-position control
switchover
MC ON: Position control
MC OFF: Speed control
5
Position control-torque control
switchover
MC ON: Torque control
MC OFF: Position control
20 V/F control Speed control
Related parameters
MC signal terminal assignment
⇒
Set "26" in any of Pr. 180 to Pr. 183 and Pr. 187 (input terminal function selection). (Refer to page 61.)
REMARKS
Set the control system selection of the second motor in Pr. 451 "second motor control method selection". Refer to the Instruc-
tion Manual (detailed) for details.
Pr. 818 "easy gain tuning response level setting", Pr. 819 "easy gain tuning"