Filter
Top Products
Parameter Description
Use this parameter when you use the
repositoryPhysicalDiskCount parameter.
You must use this parameter when you have more
than one type of physical disk media in your
storage array.
physicalDiskType
The type of physical disk that you want to use in
the virtual disk. You cannot mix physical disk types.
You must use this parameter when you have more
than one type of physical disk in your storage array.
The valid physical disk type is SAS. You must
specify a physical disk type. Use this parameter
when you use the
repositoryPhysicalDiskCount parameter.
freeCapacityArea
The index number of the free space in an existing
disk group that you want to use to create the
snapshot (legacy) repository virtual disk. Free
capacity is defined as the free capacity between
existing virtual disks in a disk group. For example, a
disk group might have the following areas: virtual
disk 1, free capacity, virtual disk 2, free capacity,
virtual disk 3, free capacity. To use the free
capacity following virtual disk 2, you specify:
freeCapacityArea=2
Use the show diskGroup command to determine
if free capacity area exists.
warningThresholdPercent
The percentage of repository capacity at which
you receive a warning that the snapshot (legacy)
repository is nearing full. Use integer values. For
example, a value of 70 means 70 percent. The
default value is 50.
repositoryPercentOfSource
The size of the snapshot (legacy) repository virtual
disk as a percentage of the source virtual disk. Use
integer values. For example, a value of 40 means
40 percent. The default value is 20.
repositoryUserLabel
The name to give to the snapshot (legacy)
repository virtual disk. Enclose the snapshot
(legacy) repository virtual disk name in double
quotation marks (" ").
repositoryFullPolicy
Specifies how snapshot (legacy) processing
continues if the snapshot (legacy) repository is full.
You can choose to fail writes to the base virtual
disk (failBaseWrites) or fail the snapshot
193