Filter
Top Products
Parameter
Parameter Description
odxEnabled
The setting to turn on or turn off ODX. To turn on
ODX set this parameter to TRUE. To turn off ODX
set this parameter to FALSE. The default setting is
that ODX is turned on.
NOTE: ODX provides a way to transfer data without using buffered read and buffered write
operations and does not require direct host involvement with the data transfer operation. When
ODX is not enabled, data is read from the source storage to the host, and then written to the target
storage from the host. With ODX enabled, the data transfer operations are directly managed by the
storage infrastructure. The data is moved directly from the source storage to the target storage
without going through the host.
Enable Or Disable SSD Cache For A Virtual Disk
Description
This command turns on or off caching using the SSD cache feature for a specific virtual disk. The virtual
disk can be either a standard virtual disk, a snapshot virtual disk, or a consistency group snapshot virtual
disk.
Syntax Applicable To A Standard Virtual Disk
set virtualDisk ["virtualDiskName"] ssdCacheEnabled=(TRUE | FALSE)
Syntax Applicable To A Snapshot Virtual Disk
set snapVirtualDisk ["snapVirtualDiskName"] ssdCacheEnabled=(TRUE | FALSE)
Syntax Applicable To A Consistency Group Snapshot Virtual Disk
set cgSnapVirtualDisk ["cgSnapVirtualDiskName"] ssdCacheEnabled=(TRUE | FALSE)
Parameters
Parameter Description
virtualDisk, snapVirtualDisk, or
cgSnapVirtualDisk
The name of the specific virtual disk for which you
want to turn on or off the SSD cache. Enclose the
virtual disk name in double quotation marks (" ")
inside of square brackets ([ ]).
ssdCacheEnabled
To turn on SSD cache, set this parameter to TRUE.
To turn off SSD cache, set this parameter to
FALSE.
227