Filter
Top Products
Syntax
show (allAsyncRemoteReplicationGroups |
asyncRemoteReplicationGroup ["
asyncRemoteReplicationGroupName"])
[summary]
Parameters
Parameter Description
allAsyncRemoteReplicationGroups
Use this parameter if you want to display the
properties for all remote replication groups.
asyncRemoteReplicationGroup
Use this parameter to display the properties for a
remote replication group. Enclose the remote
replication group name in square brackets ([ ]). If
the remote replication group name has special
characters, you also must enclose the remote
replication group name in double quotation marks
(" ") inside square brackets. If the remote replication
group name consists only of numbers, such as
"1002," you also must enclose the remote
replication group name in double quotation marks
(" ") inside square brackets.
summary
Use this optional parameter to show a concise list
of information about the synchronization progress
of one or more remote replication groups.
Show Remote Replication Group Synchronization
Progress
Description
This command displays the progress of periodic synchronization of the remote replication group
between the local and remote storage array. This command returns the progress of data synchronization
on all of the replicated pairs within the remote replication group. This command shows the progress as a
percentage of data synchronization that has been completed.
NOTE: There are two types of synchronization: initial synchronization and periodic synchronization.
Initial remote replication group synchronization progress is displayed in the Long Running
Operations dialog and by executing the show storageArray longRunningOperations
command.
Syntax
show asyncRemoteReplicationGroup ["asyncRemoteReplicationGroupName"]
[synchronizationProgress]
350