Dell 36XX Marine Radio User Manual


 
Parameter Description
repositoryFullPolicy
How you want snapshot image processing to
continue if the repository virtual disks for the
snapshot image group are full. You can choose to
fail writes to the base virtual disk
(failBaseWrites) or delete (purge) the snapshot
images (purgeSnapImages). The default action is
purgeSnapImages.
repositoryFullLimit
The percentage of repository virtual disk capacity
at which you receive a warning that the snapshot
image repository virtual disk is nearing full. Use
integer values. For example, a value of 70 means
70 percent. The default value is 75.
autoDeleteLimit
The maximum number of snapshot images that
you want to automatically delete if you have
selected to purge the snapshot images for a
repository full policy. Use integer values. The
default value is 32.
rollBackPriority
Use this parameter to determine whether system
resources should be allocated to the rollback
operation at the expense of system performance.
Valid values are highest, high, medium, low, or
lowest. A value of high indicates that the rollback
operation is prioritized over all other host I/O. A
value of
lowest indicates that the rollback
operation should be performed with minimal
impact to host I/O.
Notes
You can use any combination of alphanumeric characters, underscore (_), hyphen (-), and pound (#) for
the names. Names can have a maximum of 30 characters.
When you use this command, you can specify one or more of the parameters. You do not, however,
need to use all of the parameters.
Set Snapshot Group Media Scan
Description
This command runs a media scan on a snapshot group.
Syntax
set snapGroup ["snapGroupName"]
mediaScanEnabled=(TRUE | FALSE)
consistencyCheckEnabled=(TRUE | FALSE)
311