Filter
Top Products
MM/DD/YYYY
HH:MM:SS
Manual|Automatic NNNNNNNN bytes NNNNNNNN bytes
With the consumedCapacity parameter, the command returns information similar to the example
shown below.
Virtual Disk Physical
Capacity
Consumned
Capacity
Quota % Prov.
Consumed
virtualDiskNam
e
500.000 GB 230.000 GB 700.000 GB 46%
Show Virtual Disk
Description
For the virtual disks in a storage array, this command returns the following information:
• The number of virtual disks
• The name
• The status
• The capacity
• The RAID level
• The disk group where the virtual disk is located
• Details:
– The virtual disk ID
– The subsystem ID
– The physical disk type (SAS)
– Enclosure loss protection
– The preferred owner
– The current owner
– The segment size
– The modification priority
– The read cache status (enabled or disabled)
– The write cache status (enabled or disabled)
– The write cache without batteries status (enabled or disabled)
– The write cache with replication status (enabled or disabled)
– The flush write cache after time
– The cache read prefetch setting (TRUE or FALSE)
– The enable background media scan status (enabled or disabled)
– The media scan with redundancy check status (enabled or disabled)
• The snapshot (legacy) repository virtual disks
• The replication repository virtual disks
• The snapshot (legacy) virtual disks
• The snapshot (legacy) copies
373