Filter
Top Products
Syntax
save storageArray dbmDatabase
[sourceLocation=(disk | onboard) |
controller [(0|1)] |
contentType=(raidConfigration | all)]
file="
fileName"
Parameters
Parameter Description
sourceLocation
This parameter specifies the location from which
to obtain backup database information.
• disk indicates that data comes directly from
the database on the physical disk
• cache indicates that data comes from the RPA
memory location
The default location is disk.
controller
This parameter specifies the RAID controller
module from which data will be exclusively
retrieved, if sourceLocation is set to onboard. If
the controller parameter is not specified, data
might be retrieved from either RAID controller
modules. Valid RAID controller module identifiers
are
0 or 1, where 0 is the RAID controller module
in slot 0, and 1 is the RAID controller module in
slot 1.
contentType
This parameter specifies the content type of the
data that will be retrieved.
• If the parameter is set to raidConfiguration,
the RAID configuration data will be retrieved.
The RAID configuration data includes disk
groups and associated virtual disks.
• If the parameter is set to all, all data that
resides in the database will be retrieved. This
includes disk group and disk pool
configuration.
The default is raidConfiguration.
file
The file path and the file name to which you want
to save the database. Enclose the file name in
double quotation marks (" "). For example:
file="C:\Program Files\CLI\logs
\events.txt".
This parameter must appear last, after any of the
optional parameters.
276