Filter
Top Products
Show Physical Disk Channel Statistics
Description
This command shows cumulative physical disk channel data transfer and error information. If the RAID
controller module has automatically degraded a channel, this command also shows interval statistics.
When using this command, you can display information about one specific physical disk channel, several
physical disk channels, or all physical disk channels.
Syntax
show (physicalDiskChannel [(1 | 2)] |
physicalDiskChannels [1 2] | allPhysicalDiskChannels) stats
Parameters
Parameter Description
physicalDiskChannel
Identifier number of the physical disk port for
which to display information. Valid physical disk
port values are 1 or 2. You must put brackets ([ ])
around the physical disk channel values.
physicalDiskChannels
Identifier number of the physical disk ports for
which to display information. Valid physical disk
port values are 1 or 2. You must put brackets ([ ])
around the physical disk channel values.
allPhysicalDiskChannels
The identifier that selects all of the physical disk
ports.
Show Physical Disk Download Progress
Description
This command returns the status of firmware downloads for the physical disks targeted by the download
physicalDisk firmware or download storageArray physicalDiskFirmware commands.
Syntax
show allPhysicalDisks downloadProgress
Parameters
None.
NOTE: When all firmware downloads have successfully completed, this command returns a
Successful status. If any firmware downloads fail, this command shows the firmware download
status of each targeted physical disk. This command returns the status values shown in the
following table.
347