Filter
Top Products
Start Disk Group Blink
Description
This command identifies the physical disks that are logically grouped together to form the specified disk
group by blinking the indicator LEDs on the physical disks. (Use the stop diskGroup blink command
to turn off the indicator LEDs on the physical disks.)
Syntax
start diskGroup [diskGroupNumber] blink
Parameters
Parameter Description
diskGroup
Number of the disk group to identify. You must put
brackets ([ ]) around the disk group number.
Start Disk Group Defragment
Description
This command starts a defragment operation on the specified disk group.
NOTE: Defragmenting a disk group starts a long‑running operation that you cannot stop.
Syntax
start diskGroup [diskGroupNumber] defragment
Parameters
Parameter Description
diskGroup
Number of the disk group to defragment. You
must put brackets ([ ]) around the disk group
number.
Start Disk Group Export
Description
This command moves a disk group into an Exported state. Then you can remove the physical disks that
comprise the disk group and reinstall the physical disks in a different storage array.
NOTE: Within the disk group, you cannot move virtual disks that are associated with the premium
features from one storage array to another storage array.
380