Filter
Top Products
Parameter Description
NOTE: The previous command syntax is for a
host running Windows. The actual syntax
varies depending on your operating system.
autoSupportConfig
The parameter to return information about the
current state of the operation to automatically
collect support data. The information this
parameter returns is:
• Whether the operation is enabled or disabled
• The location of the folder where the support
data file is located
batteryAge
Displays the status, the age of the battery in days,
and the number of days until the battery needs to
be replaced.
connections
Displays a list of the drive channel port locations
and the drive channel connections.
defaultHostType
Displays the default host type and host type index.
healthStatus
Displays the health, logical properties, and physical
component properties of the storage array.
hostTypeTable
Displays a table of all host types known to the RAID
controller module. Each row in the table displays a
host type index and the platform the index
represents.
hotSpareCoverage
Displays information about which virtual disks of
the storage array have hot spare coverage and
which virtual disks do not.
features
Displays a list of the feature identifiers for all
enabled features in the storage array.
time
Displays the current time to which both RAID
controller modules in the storage array are set.
virtualDiskDistribution
Displays the current RAID controller module owner
for each virtual disk in the storage array.
summary
Returns a concise list of information about the
storage array configuration.
longRunningOperations
Shows the long running operations for each disk
group and each virtual disk in the storage array.
The longRunningOperation parameter returns
this information:
• Name of the disk group or virtual disk
• Long running operation
• Status
• % complete
364