Filter
Top Products
Parameters
Parameter Description
diskGroup
Number of the disk group for which to display
information. You must put brackets ([ ]) around the
disk group number.
cancelImport
The setting to spin the physical disks back down
after the disk group dependencies have been read.
To spin down the physical disks, set this parameter
to TRUE. To let the physical disks stay spinning, set
this parameter to FALSE.
NOTE: This command returns the dependencies of a specific disk group, which must be in an
Exported state or a Forced state. If a decision is made to retain the listed dependencies, then the
cancelImport parameter can be enforced to spin the physical disks back down. You must run the
show diskGroup importDependencies command before you run the start diskGroup
import
command.
Show Disk Pool
Description
This command returns information on the used and free capacity and other properties for the disk pool.
Syntax
show diskPool [diskPoolName]
Parameter
Parameter Description
diskPool
The alphanumberic identifier of the disk pool
(including – and _) that you want to set to a
Complete state. Enclose the diskPoolName in
square brackets ([ ]).
Show Host Ports
Description
For all HBA host ports connected to a storage array, this command returns the following information:
• HBA host port identifier
• HBA host port name
• HBA host type
344