Parameter Description
rollBackPriority
The priority for rollback operations for a
consistency group while the storage array is
operational. Valid values are highest, high,
medium, low, or lowest.
Set Consistency Group Snapshot Virtual Disk
Description
This command creates a unique name for a snapshot virtual disk of a consistency group.
Syntax
set cgSnapVirtualDisk [consistencyGroupName]
userLabel="snapVirtual DiskName"
Parameters
Parameter Description
cgSnapVirtualDisk
The name of the consistency group virtual disk that
you want to rename. Enclose the name of the
consistency group snapshot virtual disk in square
brackets ([ ]).
userLabel
The new name that you want to give to the
snapshot virtual disk in the consistency group.
Enclose the new snapshot virtual disk name in
double quotation marks (" ").
Notes
You can use any combination of alphanumeric characters, underscore (_), hyphen (-), and pound (#) for
the names. Names can have a maximum of 30 characters.
Set Disk Group
Description
This command defines the properties for a disk group.
Syntax
set diskGroup [diskGroupName]
addPhysicalDisks=(enclosureID1,slotID1 enclosureID2,slotID2...
enclosureIDn,slotIDn)
raidLevel=(0 | 1 | 5 | 6)
owner=(0 | 1)
286