Filter
Top Products
Chapter 4 ParametersAT |Troubleshooting}| BLD-E1 Series
4-62
Revision May 2009, 00DE, V0.50
Group 4 Multi-Step Speed Parameters This parameter can be set during operation.
04-00
Zero Step Speed Frequency
04-01
1st Step Speed Frequency
04-02
2nd Step Speed Frequency
04-03
3rd Step Speed Frequency
04-04
4th Step Speed Frequency
04-05
5th Step Speed Frequency
04-06
6th Step Speed Frequency
04-07
7th Step Speed Frequency
04-08
8th Step Speed Frequency
04-09
9th Step Speed Frequency
04-10
10th Step Speed Frequency
04-11
11th Step Speed Frequency
04-12
12th Step Speed Frequency
04-13
13th Step Speed Frequency
04-14
14th Step Speed Frequency
04-15
15th Step Speed Frequency
Control
mode
VF VFPG FOCPM
Factory setting: 0
Settings 0 to 8000rpm
The Multi-Function Input Terminals (refer to Pr.02-01 to 02-04) are used to select one of the
brushless DC motor drive Multi-step speeds. The speeds (frequencies) are determined by
Pr.04-00 to Pr. 04-15 as shown above.