Filter
Top Products
Chapter 4 Parameters| BLD-E1 Series
Revision May 2009, 00DE, V0.50 4-27
Group 11: Advanced Parameters : The parameter can be set during operation.
Paramete
r
Explanation Settings
Factory
Setting
VF VFPG FOCPM
11.00 System Control bit 7=1：Enable position control
bit 15=0：when power is applied，it
will re-detect the magnetic pole
position
0 ○ ○ ○
11.01 ~
11.05
Reserved
11.06 Zero-speed
Bandwidth
0~40Hz 10 ○
11.07 Low-speed
Bandwidth
0~40Hz 10 ○
11.08 High-speed
Bandwidth
0~40Hz 10 ○
11.09 ~
11.15
Reserved
11.16 Memory Address 0X0000~0XFFFF 0 ○ ○ ○