Filter
Top Products
Chapter 4 ParametersAT |Troubleshooting}| BLD-E1 Series
4-54
Revision May 2009, 00DE, V0.50
3：Desired frequency attained 1 (Pr. 02-25, 02-26)
○ ○ ○
4：Desired frequency attained 2 (Pr. 02-27, 02-28)
○ ○ ○
5: Zero speed (frequency command)
○ ○ ○
6: Zero speed with stop (frequency command)
○ ○ ○
7: Over torque (OT1)
○ ○ ○
8: Over torque (OT2)
○ ○ ○
9: Drive ready
○ ○ ○
10：Low-voltage Detection (LV）
○ ○ ○
11：Malfunction indication
○ ○ ○
12：Reserved
13：Overheat warning (Pr. 06-14）
○ ○ ○
14~16：Reserved
○ ○ ○
17：Malfunction indication 1
○ ○ ○
18~19：Reserved
20：Warning output
○ ○ ○
21：Ove voltage warning
○ ○ ○
22：Over-current stall prevention warning
○ ○ ○
23：Over-voltage stall prevention warning
○ ○ ○
24：Drive operation mode(Pr. 00-21=0）
○ ○ ○
25: Forward running command
○ ○ ○
26: Reverse running command
○ ○ ○
27~30：Reserved
31：Forward running input
○ ○ ○
32：Reverse running input
○ ○ ○
33：Zero-speed (Actual output frequency)
○ ○ ○
34：Zero speed with Stop (actual output frequency)
○ ○ ○
35~39：Reserved
40：Speed attained (including zero speed)
○ ○ ○