Delta BLD-E1 Series Outboard Motor User Manual


 
Chapter 4 Parameters| BLD-E1 Series
Revision May 2009, 00DE, V0.50 4-49
02-01
Multi-Function Input Command 3 (MI3)
Factory Setting: 1
02-02
Multi-Function Input Command 4 (MI4)
Factory Setting: 2
02-03
Multi-Function Input Command 5 (MI5)
Factory Setting: 3
02-04
Multi-Function Input Command 6 (MI6)
Factory Setting: 4
Settings VF VFPG FOCPM
0no function
1Multi-step command 1
2Multi-step command 2
3Multi-step command 3
4Multi-step command 4
5Reset
6Reserved
7acceleration/deceleration speed inhibit
8the 1st, 2nd acceleration/deceleration time
selection
9the 3rd, 4th acceleration/deceleration time
selection
10: EF input (Pr.07-28)
11: Reserved
12: Stop output
13~14: Reserved
15Running speed command from VR
16Running speed command from ACI
17Running speed command from AVI
18Emergency Stop (Pr.07-28)
19~26Reserved
27ASR1/ASR2 Selection
28Emergency stop (EF1) (Motor coasts to stop)
29~30Reserved
31: High torque bias (by Pr.07-21)
32: Middle torque bias (by Pr.07-22)