System Initialization
Polycom, Inc. 19
Step 5: Configure System Time
You also can set the RealPresence Capture Server system time from the Fast Configuration Wizard
For configuration steps, refer to Set the System Time
Configure IP Settings through Console
By default, when a new RealPresence Capture Server is started, it obtains an IP address from the DHCP
server automatically. Follow the steps below to check the IP address assigned by DHCP server. You can
configure IP settings from either Capture Server system’s Console or Admin Portal.
To set the system IP address in the RealPresence Capture Server’s console:
1 Open the console of your RealPresence Capture Server.
2 The default console display is shown in the next illustration
3 The IP address displayed on console is shown in the above illustration, the default IP address is
https://192.168.1.254
4 If needed, modify the RealPresence Capture Server IP address in the Admin UI. See To change the
system’s initial IP settings from the Admin Portal:
5 Type Alt+F2 keys to go to the login screen.
6 Enter the user name and password (both are polycom by default).
7 Set RealPresence Capture Server a static IP or DHCP for LAN interface using Network
Settings command, refer to Network Settings for details.
Note: After you are finished with DHCP setting configuration, go to console and get the IP address
information assigned by DHCP server.
8 After you set the IP, the Capture Server system will ask if you want the changes, click Yes to reboot.