Filter
Top Products
System Configuration
Polycom, Inc. 27
2 Configure the following settings:
Record Parameters
Parameter Description
Allow recording even when no
resources are available to create
live stream(s).
If this option is selected, when there are insufficient resources available to
live stream a meeting, the system records the meeting to the hard disk
automatically. You cannot continue viewing the video in real time through the
web. However, you can play back the video upon the completion of recording
and format conversion.
If this option is not selected, when there are no live streaming resources, the
system rejects all calls that have live streaming enabled.
Key Frame interval Specify the fast forward and backward intervals when playing back recorded
files on an endpoint.
For example, if it is set to one minute, the system inserts an index marker
every minute when recording. When you press Fast forward using FECC
(Far End Camera Control) or DTMF, the video playback jumps to the nearest
index marker from the current location. Shorter intervals result in larger
archive.
Indication Tone Played to indicate that recording is ongoing, typically it is a very short beep
with intervals between beeps, measured in second.
Media Encryption If the Capture Server is licensed for call encryption, this option specifies how
AES (Advanced Encryption Standard) encryption is enabled and SIP
connections:
• Required For All Calls: Enable the AES encryption for all H.323 and SIP
calls, including video and audio only calls. This option requires the device
to connect the system with AES enabled, otherwise, the connection
cannot be set up.
• When Available: Enable the AES encryption and SIP connections when
the peer device enables the AES option, and vice versa.
• Off: Disable the AES encryption and SIP connections.
Support AES 256-Bits key for
encryption
If the Capture Server is licensed for call encryption, this option specifies
whether to enable the 256-bit key for AES encryption. If not selected, the
AES uses 128-bit key for encryption by default.
Max Call Length The maximum call length for recording calls. The value is 4 hours by default.
Note: Valid call length ranges from 1 to 8 hours.
Max Call Length (for streaming
only call)
The maximum call length for streaming only calls. The value is 8 hours by
default.
Note: There is no limitation to this option.
Enable all IVR notifications Enable IVR service at system level, the default left time to play IVR is 10
minutes
Enable Global Quickcode
Playback PIN
Enable quickcode playback PIN at system level.
Note: If a PIN code is set under archive properties, the individual PIN code
will override that set at system level.