Polycom 40/0 Life Jacket User Manual


 
System Configuration
Polycom, Inc. 38
To configure OCSP:
1 Go to Configuration > Certificate Management.
2 Select Enable
OCSP.
3 Click OK. The system restarts to apply your changes.
Use HTTP protocol to access website
In addition to HTTPS, you can now access the website using HTTP protocol.
To enable HTTP protocol for server website:
1 Go to Configuration > Certificate Management.
2 Select Enable HTTP protocol for Server Website check box under Client Certificate.
3 Click OK.
Configure QoS
QoS (Quality of Service) is very important in transmission of high-bandwidth audio and video data. You can
use QoS to test and guarantee the following settings:
Average packet delay
Delay variation (jitter)
Error rate
To specify QoS parameters:
1 Go to Configuration > QoS.
2 Configure the following settings:
QoS parameters
You need to check Enable web client certificate validation firstly for OCSP
to take effect.