Polycom 40/0 Life Jacket User Manual


 
System Configuration
Polycom, Inc. 46
To customize the Logo picture of the web Management interface:
1 Go to Configuration > Customization.
2 In the Logo area, click Change Logo > Add to select the picture to be uploaded.
3 The uploaded pictures must be in the *.png format, with 201 * 54 pixels.
4 Click Open > Upload.
5 Click OK.
Setup E-mail
You can set an e-mail address for your RealPresence Capture Server system. This is filled to “From”
address in the e-mail the system sent out.
To set an e-mail address for the RealPresence Capture Server system:
1 Go to Configuration > Customization.
2 Configure the following settings:
Admin Email Settings
Sender Email: This is filled to “From” address in the email the system sent out.
Frequency: Select the period for automatic e-mail notification.
Receiver Email: The email is sent when there is administrative event occurs, like disk
warning, alert, etc.
Service Email Settings
Enable Emaill Notifications: When enabled, you will receive e-mail notification when live
streaming starts or archive is ready for VoD.
Portal Settings
When using Polycom RealPresence Media Manager or other external portal to allow users to access live
and on-demand streams, it is a best practice to redirect visitors from the Capture Server's User Portal to
the Media Manager (or 3rd party portal) home page.
You can also manage session idle timeout and maximum number of login for both Admin and User
Portal.
You can select to show both internal and external live streaming URL.