System Configuration
Polycom, Inc. 40
conforming to SNMP MIB. The interface uses a common MIB, making it interoperable with Polycom CMA,
DMA, and RMX systems.
To configure SNMP settings:
1 Click Configuration > SNMP.
2 Select Enable SNMP.
SNMP is disabled by default.
3 Configure the following agent parameters:
SNMP Parameters
4 Configure the following security settings:
Security Settings
• Available configurable options vary with the SNMP agent version and security
level selected.
• RealPresence Capture Server does not support SNMP trap.
Parameter Description
Retrieve MIB Files Retrieve MIB file to your computer.
Agent Name Specify the name of this RealPresence Capture Server agent.
Contact Country Specify the contact country for this RealPresence Capture Server.
Contact Person Specify a contact person for this RealPresence Capture Server.
SNMP Agent Version Specify the SNMP Agent version.
Parameter Description
Accepted Host Community Name Specify the community name that the host belongs to.
User Name Specify the user name that will be used to log in over the Authentication
Protocol.
Authentication Protocol Specify the type of encryption to use when connecting with this user:
•MD5: Message Digest 5
•SHA: Secure Hash Algorithm
Authentication Password Specify the password that will be used to log in over the Authentication
Protocol.
Note: A valid password contains 8-64 characters, and not include these
characters: &,',",<,>,%,|,+,=