Filter
Top Products
System Configuration
Polycom, Inc. 42
3 Click OK
When the RealPresence Capture Server system is connected to the Active Directory server, Active
Directory Status on the page displays Connected.
Password Settings
Go to Configuration > Password Settings you can manage your password, learn how to change the
security policies that control what kind of password you use and how often you have to change it.
Security Policy Parameters
LS
Parameter Description
Enable Active Directory Specify whether to enable Active Directory functionality for this system.
Active Directory Address Set the IP address or domain name of the Active Directory server to be
integrated.
Note: If you set a domain name, make sure you have already set a DNS
server address that can resolve this domain name in Configuration > IP
Settings.
Active Directory Port Specify the port number for the Active Directory, the default value is 636.
Active Directory User Set the user name that will be used by the Polycom Capture Server system to
access resources on the Active Directory server.
Active Directory Password Set the user password that will be used by the Polycom Capture Server
system to access resources on the Active Directory server.
Active Directory Base DN Can be used to restrict the Capture Server system to work with a subset of
the Active Directory (such as one tree of multiple trees, a subtree, or a
domain). Leave the default setting, All Domains, initially.
Enable SSL Connection Specify whether to enable SSL encryption for the communication between
the RealPresence Capture Server system and the AD server.
Synchronize AD Time Point Specify when to synchronize AD data on a daily basis.
Test Test whether the Active Directory server is reachable.
If the system is configured with an Active Directory server, users defined on the
Active Directory can log in to the Polycom RealPresence Capture Server system as
ordinary users. When logging in to the Polycom RealPresence Capture Server
system’s Admin Portal using an existing domain user, the user gets only ordinary
user permissions.
Parameter Description