Filter
Top Products
System Configuration
Polycom, Inc. 41
Notice about Using Polycom SNMP MIB Files
Besides standard SNMP MIB files, RealPresence Capture Server also provides two proprietary MIB files:
● POLYCOM-BASE-MIB.mib
● POLYCOM-REAL-PRESENCE-MONITORING-MIB.mib
To use these Polycom MIB files, please first import the file POLYCOM-BASE-MIB.mib, then
POLYCOM-REAL-PRESENCE-MONITORING-MIB.mib. Otherwise, the Polycom MIB files cannot be
correctly compiled.
All RealPresence Capture Server MIB files can be downloaded from the Admin Interface Configuration >
SNMP > Retrieve MIB Files
.
Diagnostics
You can use Ping to verify that the RealPresence Capture Server system can communicate with another
node in the network.
To run Ping on the RealPresence Capture Server system:
1 Go to Configuration > Diagnostics.
2 Enter an IP Address or Host Name and click Ping.
3 You will see the ping response shown in the ping result.
Active Directory
The Polycom RealPresence Capture Server system supports integration with a single Active Directory
server.
After the integration, users in the Active Directory domain can access the Admin Portal or User Portal of the
Polycom RealPresence Capture Server system directly as ordinary users without needing to be registered
directly in the Capture Server system user database.
To configure an Active Directory server
1 Go to Configuration > Active Directory.
2 Configure the following settings:
Privacy Protocol Specify the privacy protocol that you want to use:
•DES: Data Encryption Standard
•AES: Advanced Encryption Standard
Privacy Password Specify the password that will be used to log in over the privacy protocol.
Note: A valid password contains 8-64 characters, and not include these
characters: &,',",<,>,%,|,+,=