![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/9/13/913595a3-acbb-41ef-943e-565cce3e64fc/913595a3-acbb-41ef-943e-565cce3e64fc-bg3fc.png)
1020 Routing Information Protocol Commands
Example
The following example displays information related to the VLAN 15 RIP
interface.
console#show ip rip interface vlan 15
Interface...................................... 15
IP Address..................................... -----
Send version................................... RIP-2
Receive version................................ Both
RIP Admin Mode................................. Disable
Link State..................................... -----
Authentication Type............................ MD5
Authentication Key............................. "pass123"
Authentication Key ID.......................... 35
Bad Packets Received........................... -----
Bad Routes Received............................ -----
Updates Sent................................... -----
show ip rip interface brief
Use the show ip rip interface brief command in Privileged EXEC mode to
display general information for each RIP interface. For this command to
display successful results routing must be enabled per interface (i.e. ip rip).
Syntax
show ip rip interface brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.