Command Groups 85
Radius
show policy-map Displays all configuration information for the
specified policy.
PE
show policy-map interface Displays policy-oriented statistics information
for the specified interface and direction
PE
show service-policy Displays a summary of policy-oriented statistics
information for all interfaces in the specified
direction.
PE
traffic-shape Specifies the maximum transmission
bandwidth limit for the interface as a whole.
GC
and IC
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
aaa accounting network
default start-stop group
radius
Enables RADIUS accounting on the switch. GC
auth-port
Sets the port number for authentication
requests of the designated radius server
.
R
deadtime Improves Radius response times when a server is
unavailable by causing the unavailable server to
be skipped.
R
key
Sets the authentication and encryption key
for all RADIUS communications between
the switch and the RADIUS daemon
.
R
msgauth Enables the message authenticator attribute to
be used for the RADIUS Authenticating server
being configured.
R
name Assigns a name to a RADIUS server. R
primary Specifies that a configured server should be the
primary server in the group of authentication
servers which have the same server name.
R
priority Specifies the order in which the servers are to be
used, with 0 being the highest priority.
R
Command Description Mode*
