A SERVICE OF

logo

310 Ethernet Configuration Commands
ch40 Link Aggregate Down
ch41 Link Aggregate Down
ch42 Link Aggregate Down
ch43 Link Aggregate Down
ch44 Link Aggregate Down
ch45 Link Aggregate Down
ch46 Link Aggregate Down
ch47 Link Aggregate Down
ch48 Link Aggregate Down
Flow Control:Disabled
console#
The displayed port status information includes the following:
show statistics ethernet
Use the show statistics ethernet command in Privileged EXEC mode to
display detailed statistics for a specific port or for the entire switch.
Syntax
show statistics ethernet {<
unit
>/<
port-type
><
port
> | switchport}
unit
— Physical switch identifier within the stack. Values are
1-12
.
Field Description
Port The port number.
Type The port designated IEEE shorthand identifier. For example
1000Base-T refers to 1000 Mbps baseband signaling including both
Tx and Rx transmissions.
Duplex Displays the port Duplex status.
Speed Refers to the port speed.
Neg Describes the Auto-negotiation status.
Link State Displays the Link Aggregation status.