A SERVICE OF

logo

256 DHCP Layer 2 Relay Commands
dhcp l2relay (Global Configuration)
Use the dhcp l2relay command to enable layer 2 DHCP relay functionality.
The subsequent commands mentioned in this section can only be used when
the L2-DHCP relay is enabled. Use the "no" form of this command to disable
L2-DHCP relay.
Syntax
dhcp l2relay
no dhcp l2relay
Default Configuration
DHCP L2 Relay is disabled by default.
Command Mode
Global Configuration.
User Guidelines
There are no user guidelines for this command.
Example
console(config)#dhcp l2relay
dhcp l2relay (Interface Configuration)
Use the dhcp l2relay command to enable DHCP L2 Relay for an interface.
Use the "no" form of this command to disable DHCP L2 Relay for an
interface.
Syntax
dhcp l2relay
no dhcp l2relay
Default Configuration
DHCP L2Relay is disabled on all interfaces by default.