Command Groups 111
OSPFv3
show ip ospf virtual-link Displays the OSPF Virtual Interface information
for a specific area and neighbor.
PE
show ip ospf virtual-link
brief
Displays the OSPF Virtual Interface information
for all areas in the system.
PE
timers spf Configures the SPF delay and hold time. ROSPF
trapflags Enables OSPF traps. ROSPF
1583compatibility Enables OSPF 1583 compatibility. ROSPF
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
area default-cost Configures the monetary default cost for the stub
area.
ROSV3
area nssa Configures the specified areaid to function as an
NSSA.
ROSV3
area nssa default-info-
originate
Configures the metric value and type for the
default route advertised into the NSSA.
ROSV3
area nssa no-redistribute Configures the NSSA ABR so that learned
external routes will not be redistributed to the
NSSA.
ROSV3
area nssa no-summary Configures the NSSA so that summary LSAs are
not advertised into the NSSA.
ROSV3
area nssa translator-role Configures the translator role of the NSSA. ROSV3
area nssa translator-stab-
intv
Configures the translator stability interval of the
NSSA.
ROSV3
area range Creates an area range for a specified NSSA. ROSV3
area stub Creates a stub area for the specified area ID. ROSV3
area stub no-summary Disables the import of Summary LSAs for the
stub area identified by
areaid.
ROSV3
Command Description Mode*
