848 Multicast Commands
show ip pimsm bsr
The show ip pimsm bsr command displays the bootstrap router (BSR)
information. The output includes elected BSR information and information
about the locally configured candidate rendezvous point (RP) advertisement.
This command deprecates the show ip pimsm componenttable command.
Syntax
show ip pimsm bsr
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
The following information is displayed:
BSR address IP address of the BSR.
Uptime Length of time that this router has been up (in hours,
minutes, and seconds).
BSR Priority Priority as configured in the ip pimsm bsr-candidate
command.
Hash mask length Length of a mask (32 bits maximum) that is to be ANDed
with the group address before the hash function is called.
This value is configured in the ip pimsm bsr-candidate
command.
Next bootstrap message
in
Time (in hours, minutes, and seconds) in which the next
bootstrap message is due from this BSR.
Next Candidate RP
advertisement in
Time (in hours, minutes, and seconds) in which the next
candidate RP advertisement will be sent.
RP List of IP addresses of RPs.
