760 IPv6 Multicast Commands
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pimsm spt-threshold 1000
ipv6 pimsm ssm
Use the ipv6 pimsm ssm command to define the Source Specific Multicast
(SSM) range of multicast addresses.
Syntax
ipv6 pimsm ssm {default | group-address/prefixlength}
• default—Defines the SSM range access list to 232/8.
• group-address—Group IP address supported by RP.
• prefixlength—This parameter specifies the prefix length of the IP address
for the media gateway. (Range: 1–32)
Default Configuration
There is no SSM range defined by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pimsm ssm ff1e::/64
show ipv6 pimsm
Use the show ipv6 pimsm command to display global status of IPv6 PIMSM
and its IPv6 routing interfaces.
