70 Command Groups
Dynamic ARP Inspection
ip dhcp snooping trust Configure a port as trusted for DHCP snooping. IC
ip dhcp snooping verify
mac-address
Enables the verification of the source MAC
address with the client MAC address in the
received DHCP message.
GC
show ip dhcp snooping Displays the DHCP snooping global and per
port configuration.
PE
show ip dhcp snooping
binding
Displays the DHCP snooping binding entries. PE
show ip dhcp snooping
database
Displays the DHCP snooping configuration
related to the database persistence.
PE
show ip dhcp snooping
interfaces
Displays the DHCP Snooping status of the
interfaces.
PE
show ip dhcp snooping
statistics
Displays the DHCP snooping filtration
statistics.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
arp access-list Creates an ARP ACL. GC
clear counters ip arp
inspection
Resets the statistics for Dynamic ARP
Inspection on all VLANs.
PE
ip arp inspection filter Configures the ARP ACL to be used for a single
VLAN or a range of VLANs to filter invalid ARP
packets.
GC
ip arp inspection limit Configures the rate limit and burst interval
values for an interface.
IC
ip arp inspection trust Configures an interface as trusted for Dynamic
ARP Inspection.
IC
ip arp inspection validate Enables additional validation checks like source
MAC address validation, destination MAC
address validation or IP address validation on
the received ARP packets.
GC
Command Description Mode*
