846 Multicast Commands
console#show ip mcast mroute group 224.5.5.5 detail
Multicast Route Table
Expiry Up Time
Source Ip Group Ip Time(secs) (secs) RPF Neighbor Flags
--------- --------- ----------- --------- --------------- -----
show ip mcast mroute source
Use the show ip mcast mroute source command in Privileged EXEC mode to
display the multicast configuration settings such as flags, timer settings,
incoming and outgoing interfaces, RPF neighboring routers, and expiration
times of all the entries in the multicast mroute table containing the
sourceipaddr
or
sourceipaddr
|
groupipaddr
pair value(s).
Syntax
show ip mcast mroute source
sourceipaddr
{summary |
groupipaddr
}
•
sourceipaddr
— IP address of source.
•
groupipaddr
— IP address of multicast group.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays multicast configuration settings.
console#show ip mcast mroute source 10.1.1.1 summary
Multicast Route Table Summary
Incoming Outgoing
Source IP Group IP Protocol Interface Interface List
---------- --------------- --------- --------- ----------------
