RMON Commands 1177
The following table describes the significant fields shown in the display:
show rmon history
Use the show rmon history command in User EXEC mode to display RMON
Ethernet Statistics history. Also see the rmon history command.
Syntax
show rmon history
index
[throughput | errors | other] [period
seconds
]
•
index
— The requested set of samples. (Range: 1–65535)
•
throughput
— Displays throughput counters.
•
errors
— Displays error counters.
•
other
— Displays drop and collision counters.
•
period
seconds
— Specifies the requested period time to display. (Range:
0–2147483647)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
Field Description
Index An index that uniquely identifies the event.
Description A comment describing this event.
Type The type of notification that the device generates about this event.
Can have the following values: none, log, trap, log-trap. In the case
of log, an entry is made in the log table for each event. In the case of
trap, an SNMP trap is sent to one or more management stations.
Community If an SNMP trap is to be sent, it is sent to the SNMP community
specified by this octet string.
Owner The entity that configured this event.
Last time sent The time this entry last generated an event. If this entry has not
generated any events, this value is zero.
