DHCP and BOOTP Relay Commands 661
bootpdhcprelay maxhopcount
Use the bootpdhcprelay maxhopcount command in Global Configuration
mode to configure the maximum allowable relay agent hops for BootP/DHCP
Relay on the system. Use the no form of the command to set the maximum
hop count to the default value.
Syntax
bootpdhcprelay maxhopcount
integer
no bootpdhcprelay maxhshoshow arpshow arpw arpopcshow arpsshshow
show arprpow arphshow arpow show arparpount
•
integer
— Maximum allowable relay agent hops for BootP/DHCP Relay on
the system. (Range: 1-16)
Default Configuration
The default
integer
configuration is 4.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a maximum hopcount of 6.
console(config)#bootpdhcprelay maxhopcount 6
bootpdhcprelay minwaittime
Use the bootpdhcprelay minwaittime command in Global Configuration
mode to configure the minimum wait time in seconds for BootP/DHCP Relay
on the system. When the BOOTP relay agent receives a BOOTREQUEST
message, it might use the seconds-sinceclient- began-booting field of the
request as a factor in deciding whether to relay the request or not. Use the no
form of the command to set the minimum wait time to the default value.
