OSPFv3 Commands 973
Type-7 Ext..................................... 0
Link........................................... 0
Intra-area Prefix.............................. 0
Link Unknown................................... 0
Area Unknown................................... 0
AS Unknown..................................... 0
Type-5 Ext..................................... 0
Self-Originated Type-5 Ext..................... 0
Total.......................................... 0
show ipv6 ospf interface
Use the show ipv6 ospf interface command in Privileged EXEC mode to
display the information for the IFO object or virtual interface tables.
Syntax
show ipv6 ospf interface {vlan
vlan-id
| tunnel
tunnel-id
| loopback
loopback-id
}
•
vlan-id
— Valid VLAN ID.
•
tunnel-id
— Tunnel identifier. (Range: 0-7)
•
loopback-id
— Loopback identifier. (Range: 0-7)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
