A SERVICE OF

logo

Open as PDF
next previous
802.1x Commands 645
Example
The following example set the unauthenticated VLAN on port 1/g2 to VLAN
20.
console(config-if-1/g2)#dot1x unauth-vlan 20
show dot1x advanced
Use the show dot1x advanced command in Privileged EXEC mode to display
802.1x advanced features for the switch or for the specified interface. The
output of this command has been updated in release 2.1 to remove the
Multiple Hosts column and add an Unauthenticated VLAN column, which
indicates whether an unauthenticated VLAN is configured on a port. The
command has also been updated to show the Guest VLAN ID (instead of the
status) since it is now configurable per port.
Syntax
show dot1x advanced [ethernet
interface
]
•
interface
— Specifies a valid ethernet interface.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.