A SERVICE OF

logo

Open as PDF
next previous
922 OSPF Commands
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF Virtual Interface information in
the system.
console#show ipv6 ospf virtual-link brief
Hello Dead Retransmit Transit
Area ID Neighbor Interval Interval Interval Delay
------- -------- -------- -------- ---------- --------
0.0.0.2 5.5.5.5 10 40 5 1
timers spf
Use the timers spf command in Router OSPF Configuration mode to
configure the SPF delay and hold time. Use the no form of the command to
reset the numbers to the default value.
Syntax
timers spf
delay-time hold-time
no timers spf
•
delay-time
— SPF delay time. (Range: 0–65535 seconds)
•
hold-time
— SPF hold time. (Range: 0–65535 seconds)
Default Configuration
The default value for
delay-time
is 5. The default value for
hold-time
is 10.
Command Mode
Router OSPF Configuration mode.