A SERVICE OF

logo

Open as PDF
next previous
OSPF Commands 923
User Guidelines
This command has no user guidelines.
Example
The following example configures the SPF delay and hold time.
console(config-router)#timers spf 20 30
1583compatibility
Use the 1583compatibility command in Router OSPF Configuration mode
to enable OSPF 1583 compatibility. Use the no form of the command to
disable it.
Syntax
1583compatibility
no 1583compatibility
Default Configuration
Enabled is the default configuration.
Command Mode
Router OSPF Configuration mode.
User Guidelines
If all OSPF routers in the routing domain are capable of operating according
to RFC 2328, OSPF 1583 compatibility mode should be disabled.
Example
The following example enables 1583 compatibility.
console(config-router)#1583compatibility