Command Groups 67
Address Table
show ip access-lists Displays an Access Control List (ACL) and all
of the rules that are defined for the ACL.
PE
show mac access-list Displays a MAC access list and all of the rules
that are defined for the ACL.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
bridge address Adds a static MAC-layer station source address
to the bridge table.
IC
bridge aging-time Sets the address table aging time. GC
bridge multicast address Registers MAC-layer Multicast addresses to the
bridge table, and adds static ports to the group.
IC
bridge multicast filtering Enables filtering of Multicast addresses. GC
bridge multicast forbidden
address
Forbids adding a specific Multicast address to
specific ports.
IC
bridge multicast forbidden
forward-unregistered
Forbids a port to be a forwarding-unregistered-
multicast-addresses port.
IC
bridge multicast forward-all Enables forwarding of all Multicast packets on a
port.
IC
bridge multicast forward-
unregistered
Enables the forwarding of unregistered
multicast addresses
IC
clear bridge Removes any learned entries from the
forwarding database.
PE
port security Disables new address learning on an interface. IC
port security max Configures the maximum addresses that can be
learned on the port while the port is in port
security mode.
IC
show bridge address-table Displays dynamically created entries in the
bridge-forwarding database.
PE
show bridge address-table
count
Displays the number of addresses present in the
Forwarding Database.
PE
Command Description Mode*
