OSPF Commands 911
Router......................................... 0
Network........................................ 0
Summary Net.................................... 0
Summary ASBR................................... 0
Type-7 Ext..................................... 0
Opaque Link.................................... 0
Opaque Area.................................... 0
Type-5 Ext..................................... 0
Self-Originated Type-5 Ext..................... 0
Opaque AS...................................... 0
Total.......................................... 0
show ip ospf interface
Use the show ip ospf interface command in Privileged EXEC mode to display
the information for the VLAN or loopback interface.
Syntax
show ip ospf interface {vlan
vlan-id
| loopback
loopback-id
}
•
vlan-id
— Valid VLAN ID.
•
loopback-id
— Shows information the specified loopback interface.
(Range: 0–7)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
