Command Groups 75
IP Addressing
Command Description Mode*
clear host Deletes entries from the host name-to-address
cache
PE
helper address Enable forwarding User Datagram Protocol
(UDP) Broadcast packets received on an
interface.
IC
ip address Sets a management IP address on the switch. GC
ip address dhcp Acquires an IP address on an interface from the
DHCP server.
GC
ip address vlan Sets the management VLAN. GC
ip default-gateway Defines a default gateway (router). GC
ip domain-lookup Enables IP DNS-based host name-to-address
translation.
GC
ip domain-name Defines a default domain name to complete
unqualified host names.
GC
ip host Configures static host name-to-address
mapping in the host cache.
GC
ip name-server Configures available name servers. GC
ipv6 address Set the IPv6 address of the management
interface.
GC
ipv6 enable Enable IPv6 on the management interface. GC
ipv6 gateway Configures an IPv6 gateway for the
management interface.
GC
show arp switch Displays
the entries in the ARP table.
PE
show hosts Displays the default domain name, a list of
name server hosts, static and cached list of host
names and addresses.
UE
show ip helper-address Displays the ip helper addresses configuration. PE
show ip interface
management
Displays the management IP interface
information.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
