804 IPv6 Routing Commands
Example
console#show ipv6 mld-proxy
Interface Index................................ vlan 10
Admin Mode..................................... Enabled
Operational Mode............................... Enabled
Version........................................ 3
Num of Multicast Groups........................ 0
Unsolicited Report Interval.................... 1
Querier IP Address on Proxy Interface.......... fe80::1:2:5
Older Version 1 Querier Timeout................ 00:00:00
Proxy Start Frequency...........................1
show ipv6 mld-proxy groups
Use the show ipv6 mld-proxy groups command to display information about
multicast groups that the MLD Proxy reported.
Syntax
show ipv6 mld-proxy groups
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC
User Guidelines
The following parameters are displayed by this command:
Older Version 1
Querier Timeout
The interval used to timeout the older version 1 queriers.
Proxy Start
Frequency
The number of times the MLD-Proxy has been stopped and
started.
