Command Groups 133
Syslog
ip ssh pubkey-auth Enables public key authentication for incoming
SSH sessions.
GC
ip ssh server Enables the switch to be configured from a SSH
server connection.
GC
key-string Manually specifies a SSH public key. SK
show crypto key mypubkey Displays its own SSH public keys stored on the
switch.
PE
show crypto key pubkey-
chain ssh
Displays SSH public keys stored on the switch. PE
show ip ssh Displays the SSH server configuration. PE
user-key Specifies which SSH public key is manually
configured and enters the SSH public key-string
configuration command.
SP
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
clear logging Clears messages from the internal logging
buffer.
PE
clear logging file Clears messages from the logging file. PE
description Describes the syslog server. L
level Specifies the importance level of syslog
messages.
L
loggin cli-command Enable CLI command logging GC
logging Logs messages to a syslog server GC
logging buffered Limits syslog messages displayed from an
internal buffer based on severity.
GC
logging console Limits messages logged to the console based on
severity.
GC
logging facility Sets the facility of the logging messages. GC
Command Description Mode*
