A SERVICE OF

logo

Open as PDF
next previous
682 DVMRP Commands
ip dvmrp
Use the ip dvmrp command to set the administrative mode of DVMRP in the
router to active. IGMP must be enabled before DVMRP can be enabled.
Syntax
ip dvmrp
no ip dvmrp
Default Configuration
Disabled is the default configuration.
Command Mode
Global Configuration
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example sets VLAN 15’s administrative mode of DVMRP to
active.
console(config)#interface vlan 15
console(config-if-vlan15)#ip dvmrp
ip dvmrp metric
Use the ip dvmrp metric command in Interface Configuration mode to
configure the metric for an interface. This value is used in the DVMRP
messages as the cost to reach this network.
Syntax
ip dvmrp metric
metric
no ip dvmrp metric
•
metric
— Cost to reach the network. (Range: 1-31)