134 Command Groups
System Management
logging file Limits syslog messages sent to the logging file
based on severity.
GC
logging on Controls error messages logging. GC
port Specifies the port number of syslog messages. L
show logging Displays the state of logging and the syslog
messages stored in the internal buffer.
PE
show logging file Displays the state of logging and the syslog
messages stored in the logging file.
PE
show syslog-servers Displays the syslog servers settings. PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
asset-tag Specifies the switch asset-tag. GC
banner motd Specifies message-of-the-day banner. GC
banner motd
acknowledge
Acknowledges message-of-the-day banner. GC
show checkpoint
statistics
Shows the checkpointing status. PE
clear checkpoint
statistics
Clears the statistics for the checkpointing
process.
GC
cut-through mode Enables the cut-through mode on the switch. GC
hostname Specifies or modifies the switch host name. GC
initiate failover Forces failover of management unit. GC
member Configures the switch. SG
movemanagement Moves the Management Switch functionality
from one switch to another.
SG
nsf Specifies non-stop forwarding. GC
nsf restart-interval Specifies the length of the grace period on the
restarting router.
GC
Command Description Mode*
