A SERVICE OF

logo

504 QoS Commands
traffic-shape
Use the traffic-shape command in Global Configuration mode and Interface
Configuration mode to specify the maximum transmission bandwidth limit
for the interface as a whole. This process, also known as
rate shaping
, has the
effect of smoothing temporary traffic bursts over time so that the transmitted
traffic rate is bounded. To restore the default interface shaping rate value, use
the no form of this command.
Syntax
traffic-shape
bw
kbps
no traffic-shape
bw
— Maximum transmission bandwidth value expressed in Kpbs.
(Range: 64 - 4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
Interface Configuration (Ethernet, Port-channel) mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the setting of traffic-shape to a maximum
bandwidth of 1024 Kpbs.
console(config-if-1/g1)#traffic-shape 1024 kbps