232 Address Table Commands
show bridge address-table
Use the show bridge address-table command in Privileged EXEC mode to
display all entries in the bridge-forwarding database.
Syntax
show bridge address-table [vlan
vlan
] [ethernet
interface |
port-channel
port-channel-number
]
•
vlan
— Specific valid VLAN, such as VLAN 1.
•
interface —
A valid Ethernet port
.
•
port-channel-number
— A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In this example, all classes of entries in the bridge-forwarding database are
displayed.
console#show bridge address-table
Aging time is 300 Sec
Vlan Mac Address Port Type
------- --------------- ----- -------------
1 0000.0001.0000 1/g1 Dynamic
1 0000.8420.5010 1/g1 Dynamic
1 0000.E26D.2C2A 1/g1 Dynamic
1 0000.E89A.596E 1/g1 Dynamic
1 0001.02F1.0B33 1/g1 Dynamic
