A SERVICE OF

logo

810 IPv6 Routing Commands
Example
console#show ipv6 mld traffic
Valid MLD Packets Received..................... 52
Valid MLD Packets Sent......................... 7
Queries Received............................... 0
Queries Sent................................... 7
Reports Received............................... 52
Reports Sent................................... 0
Leaves Received................................ 0
Leaves Sent.................................... 0
show ipv6 neighbors
Use the show ipv6 neighbors command in Privileged EXEC mode to display
information about the IPv6 neighbors.
Syntax
show ipv6 neighbors
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Bad Checksum MLD
Packets
The number of bad checksum MLD packets received by
the router.
Malformed MLD Packets The number of malformed MLD packets received by the
router.