A SERVICE OF

logo

Open as PDF
next previous
1100 Configuration and Image File Commands
boot system
Use the boot system command in Privileged EXEC mode to specify the
system image that the device loads at startup.
Syntax
boot system [image1|image2]
•
image1|image2
— Image file.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Use the show bootvar command to find out which image is the active image.
Example
The following example loads system image image1 for the next device
startup.
console# boot system image1
clear config
Use the clear config command in Privileged EXEC mode to restore the
switch to the default configuration.
Syntax
clear config
Default Configuration
This command has no default configuration.