Filter
Top Products
CPF180i and CPF300i Page 105
Figure 16.4a - Example of PTX information window on CP180
16.4.0 Delete PTX
The Delete PTX function permamently removes the selected PTX from the MOBILARM
Alarm Status List and from the Chart page.
Using the ShuttlePoint knob, move the cursor over the PTX icon and then:
ON CPF180I
press [ENT], select DELETE using the ShuttlePoint knob and press [ENT]. A warning pop-
up window will be shown. Select
YES and press [ENT].
ON CPF300I
press [DELETE] A warning pop-up window will be shown. Select YES and press [ENT].
16.4.1 Goto PTX
When Goto is selected on the GPS Chart Plotter, navigation will start to the PTX icon
location. After the GPS Chart Plotter has received a PTX MOB alarm, using the ShuttlePoint
knob move the cursor over the PTX to navigate to and then:
ON CPF180I
press [ENT], select GOTO using the ShuttlePoint knob and press [ENT].
Figure 16.4.1 - Example of Goto PTX on CP180
ON CPF300I
two Soft Keys under the display will be shown:
a. [G
OTO], when pressed will start navigating to the PTX MOB location
b. [L
IST], when pressed will show the MOBILARM Alarm Status List page. Refer to Par.
16.4.2 for Alarm Status List.